Loading... Please wait...

Package # 1 -------- 20 Sheets of RAAMmat BXT II (37.5 sq ft) and 3 yards of Ensolite IUO Peel and Stick Foam (41.625 sq ft)

  • Image 1
Your Price:
$179.96 (You save $20.00)
26.00 LBS

Product Description

BXT II RAAMmat is a world class automotive sound deadener, the absolute best value on the market, but all mat products work in lower frequency areas primarily.

Ensolite foam takes over from there to deal with higher frequencies, decoupleing, diffusing and is a super thermal barier.

Using both products will more than double the results that either type of product can do on its own.

If you follow the HOW TO guide as close as possible you will acheive incredible results for your time, effort and cost.

We have shipped tens of thousands of these kits to our satisfied fellow enthusiasts around the world.

1 pack BXT II RAAMmat, 20 sheets, 37.5 sq ft.

3 yards Peal and Stick Ensolite, 55.5'Wx36" long, 41.625 sq ft, cut from a roll so one section 56"x9' long.

Note: For most vehicle types Package #1 will take care of the most critical areas, door, rear sides, rear wall, etc, depening on vehicle type, (if you wish to add the floor smaller vehicles will require Package #2, larger vehicles will require 2x Package #1)

NOTE II: COMPETION level deadening, If you are building a special case vehicle, audio competition, larger SUV, really loud tires, exhaust, etc....you may need more product.


Find Similar Products by Category

Write your own product review

Product Reviews

Showing reviews 1-10 of 102 | Next

  1. I love this stuff! 5 Star Review

    Posted by on 19th Nov 2018

    Amazing product @ a fraction of the price of brand name. I will continue to use your product on all my vehicles

  2. Great products been using them for years 4 Star Review

    Posted by on 10th Sep 2018

    I've done 5 of my cars with using Raamaudio BXT an Ensolite even before these pre packaged kits were available.

    Couple of things I don't like with this newer version:
    1. The layer to expose the sticky side of BXT is now plastic, it used to be wax paper. It felt really weird dispoing of that much plastic
    2. The layer to expose the sticky layer of ensolite is increibly difficult to remove and is in fact the slowest part of the install. The layers are super sticky and require a razor blade to carefully separate the layers, on on the older stuff it was way easier. Maybe thats a good thing as its stickier now.

    I found I had plenty of BXT, but could have used a little more ensolite in the kit.

  3. Sound deadening material for automobile sound system 4 Star Review

    Posted by on 7th Aug 2018

    There two different materials and both are good material for the purpose of insulating your vehicle for external noise and making doors become a sound speaker enclosure which increases sound performance.

    The only thing about this Package #1 is that it should explain the quantities included and what it is suppose to cover on a given make/model vehicle. I had way too much material left over because I decided not to insulate the floors of my Tacoma.
    Good Stuff!

  4. Great Product and good package 5 Star Review

    Posted by on 25th Mar 2018

    Between this and an extra 5 sheets of BXTII I had enough to do my GMC crew cab. I did the inter and outers door skins and double layer on the back wall of the cab. I followed the recommended deadening techniques on this site. Not only does my thousand watt stereo sounded way better, but it blocked 2dBs of road "noise". Which had gotten excessive because of the turbo, exhaust, and mud tires I have on my truck.

  5. Great product, great value 5 Star Review

    Posted by on 23rd Feb 2018

    This kit came with tons of material. Following the how-to recommendations, I did all 4 doors and most of my hatch area in a compact hatchback. I still have material leftover to do the front floor area when I get time. It's great product, and significantly more of it for the price. I especially like the Ensolite for vibration and noise reduction. This transformed the way my speakers sound out on the road. Thanks!

  6. Great Stuff 4 Star Review

    Posted by on 11th Feb 2018

    This is my second truck I'm matting. Previous was a 2017 Tacoma double cab. This kit was a perfect amount.

    I ordered this kit to mat my doors outer and inner skins on my Nissan Frontier Crew cab. I planned to also mat the rear wall and rear floor but I needed to order more materials. I had about 2yards of Ensolite left and 2.5 sheets of Raamat. the 30 sheet pack would have been perfect to do what I needed. I ordered 10 more sheets and an extra yard of Ensolite.

    I tried to buy a few more sheets locally but the local shop had Balistic mat they were trying to sell fro $30/sheet. I'm sure it's good stuff but it felt no different than the Raamat so I passed.

    I love this product combo. Easy to cut, easy to install, not the least bit messy. I use the Ensolite for everything. Lining the speaker mounts to get a good air tight seal, plugging holes, wrapping wire bundles in the dash, protecting surfaces when I've doth the dash apart.

  7. Great product 5 Star Review

    Posted by on 10th Jan 2018

    This is my second vehicle that I've used BXT II and Ensolite in.
    It made a world of difference in the stock speakers that I'm not replacing them.
    The ride is much more quiet and the doors of my 4runner shut with that "thunk" of German vehicles.
    If I buy another vehicle this product will go in it as well.

  8. amazing 5 Star Review

    Posted by on 18th Aug 2017

    Its amazing how much this stuff quites the truck and outside world. 2014 tacoma double cab just have the inner and outter door skins done so far but truly amazing. It makes the stock stereo sound great even thou its getting swapped out in a few weeks. Highly recommend this product. Best bang for buck i have spent on my truck. Will def be first thing i do on next new vehicle A+++++

  9. Easy to work with, works fabulous 5 Star Review

    Posted by on 13th Jul 2017

    After conferring with Jason, I ordered the suggested amount of Ensolite and RAAmat. He was very helpful and quick to respond.

    Installation in my 2007 Silverado was a breeze. I removed the seats, console and carpeting, vacuumed the floor pan, and then a quick wipedown with 90% alcohol (rubbing alcohol). Most of the RAAmat went down in full sheets, with some small patching on curves. The Ensolite was cut into 2'x2' sections for ease of installation.took about 6 hours to do the entire floor pan. Then I took on the doors, and using the suggestions contained in the guide, I got the doors well covered. I even did the mid and front pillars. What a difference. Like riding in a high end luxury car.

  10. Sound Investment 5 Star Review

    Posted by on 6th Jul 2017

    Great products. With some patience and a little planning does a good job.

Showing reviews 1-10 of 102 | Next