BXT II RAAMmat is a world class automotive sound deadener, the absolute best value on the market, but all mat products work in lower frequency areas primarily.
Ensolite foam takes over from there to deal with higher frequencies, decoupleing, diffusing and is a super thermal barier.
Using both products will more than double the results that either type of product can do on its own.
If you follow the HOW TO guide as close as possible you will acheive incredible results for your time, effort and cost.
We have shipped tens of thousands of these kits to our satisfied fellow enthusiasts around the world.
1 pack BXT II RAAMmat, 20 sheets, 37.5 sq ft.
3 yards Peal and Stick Ensolite, 55.5'Wx36" long, 41.625 sq ft, cut from a roll so one section 56"x9' long.
Note: For most vehicle types Package #1 will take care of the most critical areas, door, rear sides, rear wall, etc, depening on vehicle type, (if you wish to add the floor smaller vehicles will require Package #2, larger vehicles will require 2x Package #1)
NOTE II: COMPETION level deadening, If you are building a special case vehicle, audio competition, larger SUV, really loud tires, exhaust, etc....you may need more product.
Posted by Rob on 9th Jul 2016
Before finding RAAMmat I had ordered some Dynamat Extreme. I ordered RAAMmat package #1 and intended to use both together. Upon receiving the RAAMmat I returned the Dynamat for a refund.
These are high quality materials for considerably less cost then the competition. The mat and Ensolite are very easy to work with. If you follow the online instructions and don't rush through it you can't go wrong. My 2014 Impreza hatch is known for loud road noise. I have only the 2 rear doors completed so far and the difference is very noticeable. Can't wait to hear the finished project with the RAAMmat, Ensolite, and 6 new speakers.
If you are thinking about upgrading your car this is the stuff you want to use.
Posted by Gary D. on 15th Jun 2016
We received great answers to our questions prior to ordering. It arrived very quickly to the house. The silver sided RAAMMAX is beyond sticky. The black foam material arrived folded up with wrinkles and creases that we could not flatten/roll out. So half of our engine cover is nice and smooth, and the other half has crease marks, which makes it look terrible. We had no choice but to try and roll them out once it was put on, but it just did not roll out. I believe that the creases were being folded and shoved it the box, and experienced memory in the ceease. In the future, it would be better if it were rolled and pavked, and not shoved into the box like we received. This is the only reason it did not get marked as "The best".
Posted by Steve W in Saint Louis Missouri on 26th May 2016
I researched the internet and questioned all my car buddies about sound deadening materials. I also stopped at a couple of high end car audio shops in my area. After all that I chose Raam Audio products and could not be happier. The Raamat and Ensolite are both SUPER sticky. Now instead of the panels on my car having a hollow ring to them they have a solid thud.
Posted by Unknown on 23rd May 2016
Not tested yet but this product is very easy to use. Cut to shape and it will conform to any shape of your bodywork. Did a mk4 jetta wagon / golf variant. The whole trunk is done and there's plenty left for the front.
Posted by Christian on 8th Mar 2016
It takes a while to do four doors if you have never done it before, but the instructions are clear enough. The results are impressive with a noticeably quieter interior. However, I think my favorite thing is the way a door closing goes from a flimsy clank to a satisfying thud !! Raamaudio kicks ass !
Posted by Jeremiah Barraclough on 23rd Feb 2016
I spoke with Jason about my project and he recommended what I should use. I took his advice and it was perfect. I have used fatmat and dynomat extreme in the past. The Raammat is so much better. I liked it so much I ordered more for another vehicle once I saw the quality of Raammat. I was a little skeptical of the ensolite since it was a pull and peel. I am used to using adhesive spray. The ensolite was amazing! Very very sticky. I will never use another sound deadening product again over this stuff
Posted by Elvin P. on 2nd Feb 2016
Jason was very knowledgable about his products. Not like some sales staff that just push whatever is on sale. I've used a lot of different products over the years and this stuff is great. Easy to apply. The combo of the Raam mat and ensolite is the way to go! I will definitely be using this product again. You get a lot more product for you money.
Posted by Kris on 22nd Jan 2016
Great product! Will definitely order again and sound deadened another car. Can't beat the price either! It's awesome u can do a 1200-1500 for practical free all it takes is your time and if u follow the instructions online your golden! Highly recommend!
Posted by Kris on 12th Jan 2016
Far out exceeded my expectations, more bang for you buck. For never having done this before I'm very happy with my time, effort and money! I used this package on my 08 tacoma and may have went a little board on the doors so I only ended up having enough for the four doors but, I will be buying more of the bxt so that I can complete behind the rear seats and floors.
Posted by Unknown on 6th Jan 2016
I had looked on the Internet and tried to determine what product was good, and the best bang for you buck. As the old saying goes you get what you pay for. You must purchase butyl based product, not a asphalt. What impressed me the most was the step by step process laid out by RAAMudio, and the estimated material they determined,since I was not 100% sure how to complete the task. The material provided was correct, and the job was completed per the instructions provided. I could not believe the differance in before and after. I have a 2014 Ford F-150 reg. cab. Thanks RAAMaudio for all the help and guidance.
Choose a currency below to display product prices in the selected currency.