BXT II RAAMmat was engineered to be the absolute best real automotive deadening mat on the market for the lowest possible cost.
If you pay more for deadening mat you are simply paying to much, if paying less (sometimes even more) unfortunately you are not likely getting a real deadening product so please choose carefully.
Perfect amount for a basic but very effective install in most vehicles, you can double the results by adding 3 yards of PS Ensolite!
37.5 sq ft per box flat pack box, 20 sheets, 11x23", more coverage than our competitors "comparable" products.
Butyl based formula specifically engineered to compete with the top notch expensive brands.
Peal and stick for easy application, conforms well, stays put.
60 mils thick (.060" and .52lbs per sq ft, check the weight/thickness/cost of the other products on the market;) It is the correct balance to get the job done as needed.
4 mil soft aluminum finish (softer aluminum to help prevent cuts while installing, hard aluminum like others use has been known to cause serious lacerations.)
250 degree temp rating (any higher rating is a moot point, the vehicle would already be on fire so we shoot for realistic numbers and spend our resources on making the performance better instead;)
Showing reviews 1-10 of 59 | Next
Posted by Bobby on 30th Oct 2014
My son put this in his jeep and recommended it to me. Glad he did. Great stuff. Totally satisfied with the quality and ease of install.
Posted by Unknown on 30th Sep 2014
good product, chewing gum like butyl back and metal/foil front. sticks well, used 4 panels to kill resonating rear hatch in my jeep cherokee. very happy with the product, look forward to trying the ensolite next!
Posted by Darrell on 26th Aug 2014
I have used a few other products, but for the last many years have been using RAMmat and the ensolite to top it off. Great value, with the right results. All my installs start right with RAMmat.
Posted by John Avenson on 11th Aug 2014
The panels were delivered in a quick two days from ordering. Great service
Posted by Unknown on 15th Jul 2014
This is an excellent product! It is so easy to work with! I put full sheets where I could, and then cut it in to strips about 4 inches wide.
Posted by John Avenson on 13th Jul 2014
These panels of thick material came in a box very fresh and flat without ripples. Usually Dynamate is delivered all rippled as if it was rolled up at some point. I don't have DB numbers for this but it reduces the sound travel well. It sticks well also.
Posted by Unknown on 31st May 2014
I have tried diffirent products, and this one shows a better result. Very sticky, doesnt smell, thick layer of it.
Never buy roofing crap...
On a market for years, great service.
Posted by Rich keep_hope_alive on 28th May 2014
I've used BXT II on several vehicles, including my own. My newest car is a 2014 Accord and despite some factory efforts, the panels are resonant. 6 sq. ft. per door yields a very damped response. I use BXT II on all metal surfaces to control resonance. I rap my knuckles on the metal panels and listen for how long the sound "rings". then add and knock and repeat until i no longer hear any "ringing". I end up using less deadener with products like BXT II as compared to cheaper, less performing matts.
Posted by Gramps on 22nd Apr 2014
Bought this mostly to lessen the heat that came through the floorboards of my Jeep. Seems to work well, and the Jeep is also a lot quieter. I'll probably get another box to finish up the rear floor panels and wheelwells!
Posted by Steve on 2nd Mar 2014
I have use Rammat on several of my vehicles now over the years! It is by far the easiest to install. I have some in an install that is 8 years old and it's still in place and doing it's job! What more can I ask for! Great product, great price!
Showing reviews 1-10 of 59 | Next
Choose a currency below to display product prices in the selected currency.